Home  - Science - Finite Elements Analysis

Books Baby Camera Phones Computers Games DVD Electronics Kitchen Magazines Music Garden Software Tools Toys Video Apparel & Accessories Jewelry & Watches Musical Instruments Health & Personal Care Beauty Sports & Outdoors Office Products

e99.com Bookstore

Images

Newsgroups

81-93 of 93    Back | 1  | 2  | 3  | 4  | 5

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

Finite Elements Analysis:     more books (100)

Linear and Nonlinear Finite Element Analysis in Engineering Practice by John Raftoyiannis, Constantine Spyrakos, 1997-01-01 Practical Introduction to Finite Element Analysis by Y. K Cheung, M. F. Yeo, 1979-06-05 Finite Element Analysis: Education and training Finite Element Analysis of Plane Frames and Trusses by Jack W. Schwalbe, 1989-09 Finite Element Analysis in Fluid Dynamics by T.J. Chung, 1978-07 Field measurements and corresponding finite-element analysis of closure during shaft sinking at the Lucky Friday mine by Aldon E. Gooch, 1976-01-01 Finite Element Analysis on Microcomputers by Nicholas M. Baran, 1991-09 Finite Element Analysis of Elastomers Nonlinear Finite Element Analysis and Adina: Proceedings of the 6th Adina Conference Finite Element Analysis of Reinforced Concrete Structures (Special Publication (Amer Concrete Inst)) Finite Element Analysis of Degraded Concrete Structures by Unnamed Unnamed, 1999 State-of-the-art report on finite element analysis of reinforced concrete Computer Technology 1999: Risk Analysis, Stress Analysis, Nonlinear Finite Element Analysis and Analysis of Perforated Structures (Pvp (Series), Vol. 385.) by Mass.) Pressure Vessels and Piping Conference (1999 Boston, 1999-09 Finite Element Analysis and Applications by R. Wait, A. R. Mitchell, 1986-02

lists with details

81. MIT OpenCourseWare | Mechanical Engineering | 2.094 Finite Element Analysis Of S
    The objective of this task is that each student obtains handson experience in solving analysis problems using a typical finite element code.  
    http://ocw.mit.edu/OcwWeb/Mechanical-Engineering/2-094Finite-Element-Analysis-of
    
    Extractions: Every student is required to complete a term project. The objective of this task is that each student obtains hands-on experience in solving analysis problems using a typical finite element code. The term project should address a problem solution in solids and structures, fluid flows, or fluid-structure interactions using ADINA. Some suggested projects: Large deformation analysis of a rubber sheet with holes. Large deformation analysis of a thick-walled rubber cylinder subjected to internal pressure. Large displacement collapse analysis of an elastic thin structure (beam, plate, shell structure). Elasto-plastic collapse analysis of a structure, for example a truss bridge.

82. Faculty Of Engineering: Department Of Aeronautics: The Composites Centre | Cours
    finite element analysis of composite structures. The course will then focus on how composite structures can be modelled with finite element analysis.  
    http://www.imperial.ac.uk/aeronautics/composites/courses/FEAdetails_July04.htm
    
    Extractions: Quick Navigation Imperial home page A-Z of Departments Courses Research Alumni Faculty of Engineering Faculty of Life Sciences Faculty of Medicine Faculty of Physical Sciences Tanaka Business School Spectrum (College Intranet) College directory Help Note: Your browser does not support javascript or you have javascript turned off. Although this will not affect your accessibility to the content of this site, some of the advanced navigation features may not be available to you. Home Course Note: Some of the graphical elements of this site are only visible to browsers that support accepted web standards . The content of this site is, however, accessible to any browser or Internet device. Course aims

83. CEI Virtual Campus - ASME Section VIII, Division 1, Design And Fabrication Of Pr
    Within the various disciplines of engineering and science, finite Element analysis is becoming ever more widelyASME finite ELEMENT analysis Brief  
    http://elearn.asme.org/courses/finiteelement.htm
    
    Extractions: using the FEA program ANSYS. In addition, the astute student can gather insight into performance of more complex analyses, such as transient dynamic analyses, contact, and fatigue, though these topics will not be specifically covered in this course. The course emphasizes theory only to the extent necessary for the user to understand the implications of FEA. It is not meant to produce finite element theorists, but rather a class of responsible users.

84. ELECTRICAL MACHINE THEORY THROUGH FINITE ELEMENT ANALYSIS
    ELECTRICAL MACHINE THEORY THROUGH finite ELEMENT analysis by A Monti, F Ponci (Politecnico di Milano, Italy) M Riva (Universitá degli Studi di Milano, Italy  
    http://www.wspc.com/books/engineering/4786.html

85. Course Description
    Course 100, •, Engineering with finite Element analysis. This twoday class is an introduction into the use of finite element analysis in engineering industry.  
    http://www.padtinc.com/support/training/course.asp?c=100

86. Wiley Canada::Finite Element Analysis
    . Design, finite Element analysis Barna Szabó, Ivo Babuška ISBN 0471-50273-1 Hardcover 384 pages March 1991 CDN $253.99 Add to Cart.  
    http://www.wiley.ca/WileyCDA/WileyTitle/productCd-0471502731.html

87. FEM Analysis - Finite Element Method - ASD GmbH
    The finite Element analysis FEA a numerical method for calculation of complex geometric structures to solve different physical problems.  
    http://www.asd-online.com/eng/fem-analysis.htm
    
    Extractions: FEM F inite E lement M ethod or FEA F inite E lement A nalysis is a numerical method for calculating stresses and deformations in complex geometrical structures. The structure is divided into so called "finite elements" connected through nodes. The physical facts are described on the basis of initial or boundary conditions for each of the elements concerned. The definitions of all elements are summarised in the global system of equations, which can be solved. As a result, strength tests and optimisation can be performed during the initial orthopaedic-implant development phase to save considerable time and a range of biomechanical tests. Modelling Structural-mechanical analysis Dynamic Fracture mechanics Design optimisation Fatigue estimation using acknowledged procedures Nonstructural analysis User specified visualisation and evaluation User specified evaluation and representation of the results with plots, tables, graphs and animations

88. Michigan Concrete Canoe - 2001 Technical
    3. Calculating Drag. 4. finite Element analysis. 5. Mix Design. 6. Construction. 7. Presentation. Last Updated 4/22/03. kmaschke@umich.edu. finite Element analysis.  
    http://www.engin.umich.edu/team/canoe/fea.html
    
    Extractions: Design Techniques 1. 3D Hull Design 2. Computing Hydrostatics 3. Calculating Drag 4. Finite Element Analysis ... 7. Presentation Last Updated: 4/22/03 kmaschke@umich.edu Finite Element Analysis is a computational method by which the internal strains of any body can be evaluated in a piecewise fashion to provide useful stress and deflection information. Commercially available FEA programs provide an easier interface by which to do the computations. ABAQUS and ANSYS are available on any CAEN computer . Before working through this tutorial (of sorts) you will need a reasonable understanding of ABAQUS. You may also want to talk with Professor El-Tawil, an expert on FEA and teacher of CEE 510. An advantage of finite element analysis is that you can test your structure in just about any mode imaginable - granted, more creative models require a lot more work. I made the assumption that due to symmetrical loading all forces would act equal and opposite along the centerile of the canoe. Therefore, I could restrain this edge and not worry about having an unstable structure. This model is described in detail below. Note: After further evaluation, it turns out that this model us unrealistically conservative in computing deflections. See the report above for better techniques.

89. 4.3.1 Finite Element Analysis
    4.3.1 finite element analysis. A complete transient simulation of the IGBT module is now presented to prove the theoretical validity of the RCCM.  
    http://www.iis.ee.ethz.ch/~csyun/papers/Thesis/node51.html
    
    Extractions: Next: 4.3.2 RC components extraction Up: 4.3 RC Component Model Previous: 4.3 RC Component Model A complete transient simulation of the IGBT module is now presented to prove the theoretical validity of the RCCM. A restricted section of is modeled and simulated to take advantage of the system symmetry in the transient state. The simulations are carried out through the 3D-FEM, SOLIDIS and ANSYS . A finite element mesh is constructed carefully to obtain an optimum mesh size. A final structured mesh has 4647 elements and 4840 degrees of freedom. Figure shows the dynamic temperature responses at internal positions beneath the IGBT chip center. This dynamic responses are obtained with 100 W constant power applied in the IGBT chips, having a volume of mm . All the lateral surfaces are retained as perfectly adiabatic, while the bottom of the base plate is supposed to be kept at the isothermal boundary condition of 300 K . After approximately t s , the rate of heat-up of each component layer eventually approaches the steady state temperature. Dynamic temperature responses give an idea that there is a propagation delay of the heat flux from the silicon chips to the bottom case. Several tens of milliseconds are required for the heat to diffuse to the substrate beyond the chips, and several hundred milliseconds are required for heating the entire IGBT module. The propagation delay of heat flux represents the sequential accumulation of heat flux in the component layers. This concept is used to define the time constant in the thermal network through the RCCM.

90. Finite Element: BMEN/ENGR 636, Introduction To The Finite Element Method, Syllab
    Department of Biomedical Engineering. finite Element analysis BMEN/ENGR 636 INTRODUCTION TO THE finite ELEMENT METHOD Fall Semester 2003.  
    http://www.bmen.tulane.edu/~rth/636Syllabus.html

91. BML:research Project Finite Element Analysis (FEM) On Spine
    Research Project. www.biomechanik.de. finite Element analysis (FEM) on Spine. Stress analysis in Bones and Implants. größeres Bild,  
    http://www.medizin.fu-berlin.de/biomechanik/Profes1e.htm
    
    Extractions: A three-dimensional nonlinear finite element model of the lumbar spine was developed. The model consisted of more than 8,000 volume elements and had more than 30,000 degrees of freedom. The nucleus pulposus was simulated by means of an incompressible fluid-filled cavity and the annulus fibrosus by volume elements. The fibres of the annulus were arranged in four layers in radial directions. Each layer consisted of 120 spring elements. The facet joints were modelled as two parallel plain surfaces which only transmitted compressive forces perpendicular to their orientation. All seven ligaments were included in the model. The model was loaded with pure moments in the three anatomical main planes. ( Zander et al 2002 Poster [47 kByte] Print Version [429 kByte]

92. Open-File Report 01-0357 -- A Preliminary Finite-element Analysis Of A Shallow L
    Savage, WZ, Baum, RL,Morrissey, MM, and Arndt BP, 2000a, finite element analysis of the Woodway Landslide Washington, US Geological Survey Bulletin 2180. 9p.  
    http://pubs.usgs.gov/of/2001/ofr-01-0357/ofr-01-0357.html
    
    Extractions: U.S.Geological Survey The Seattle area has a long history of landslide problems (Tubbs, 1974, Thorsen, 1989, Galster and Laprade, 1991, Baum, and others, 1998). Shallow landslides often initiate in colluvium derived from glacial deposits, are frequently triggered by winter rain storms (Tubbs, 1974), and may mobilize into debris flows that can cause considerable damage (Baum and others, 1998). In this report we present a preliminary finite-element based stability analyses of a shallow landslide that occurred during the period from December 1996 to early January 1997 near Alki Beach and Duwamish Head at the north end of West Seattle (Figure 1). During this period a series of snowstorms, freezing rain and warm rain produced many debris flows and landslides in the Seattle area (Baum and others, 1998). The shallow landslide that we are analyzing was 18 m high and 75 m long. It mobilized into a debris flow that traveled down a 35-meter-high embankment below the slide damaging the bottom floors of two apartment buildings at the foot of the embankment (Figure 2). In what follows, we briefly outline the geology and hydrology of the Alki landslide site, give a short description of the computational algorithms used in the finite element program, and present the results of the finite element model of the landslide.

93. Finite Element Analysis: Theory And Applications With ANSYS, 2nd Edition
    Request a Review Copy. Request an Instructor or Media review copy. finite Element analysis Theory and Applications with ANSYS, 2nd Edition. By Saeed Moaveni.  
    http://www.informit.com/title/0131112023
    
    Extractions: Dimensions 7" x 9-1/4" ; Pages: 822; Edition: 2nd. Unique in approach and content, this book presents the theory of finite element analysis, explores its application as a design/modeling tool, and explains in detail how to use ANSYS intelligently and effectively. KEY TOPICS: This book covers trusses; axial members, beams, and frames; one-dimensional elements; two-dimensional elements; three-dimensional elements; dynamic problems; design and material selection; design optimization; and more. MARKET: For Design Engineers in CAE-CAD. 1. Introduction.

A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z

81-93 of 93    Back | 1  | 2  | 3  | 4  | 5