Geometry.Net - Science: Aerospace Engineering


Home - Science - Aerospace Engineering

e99.com Bookstore

Images

Newsgroups

81-100 of 184 Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next 20

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Aerospace Engineering: more books (100)

Aircraft Systems: Mechanical, Electrical and Avionics Subsystems Integration (Aerospace Series (PEP)) by Ian Moir, Allan Seabridge, 2008-06-03
3rd International Conference on Optical Information Processing: 28-31 May 1999 Moscow, Russia (Proceedings of Spie--the International Society for Optical Engineering, V. 3900.) by Russia) International Conference on Optical Information Processing (3rd : 1999 : Moscow, Iu. V. Guliaev, 1999-09
Mechanics of Sandwich Structures: Presented at the 2000 Asme International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida (Ad (Series), Vol. 62.) by American Society of Mechanical Engineers. Applied Mechanics Division, 1998-01
Multiple Scales Theory and Aerospace Applications (Aiaa Education Series) by Rudrapatna V., Ph.D. Ramnath, 2010-09-15
Nondestructive Evaluation and Health Monitoring of Aerospace Materials, Composites, and Civil Infrastructure V (Proceedings of Spie)
Evaluation of the National Aerospace Initiative by Committee on the National Aerospace Initiative, National Research Council, 2004-06-17
Nondestructive Evaluation And Health Monitoring of Aerospace Materialscomposites And Civil Infrastructure Iv. (Proceedings of Spie)
A Case Study by Aerospatiale and British Aerospace on the Concorde by Jean Rech, J Rech and C Leyman, et all 1994-12
Nondestructive Evaluation And Health Monitoring Of aerospace Materials And Composites Iii (Proceedings of SPIE 5393)
Principles of Flight Simulation (Aerospace Series (PEP)) by David Allerton, 2009-12-02
Robust Control: The Parameter Space Approach (Communications and Control Engineering) by Jürgen Ackermann, 2002-09-17
Distributed Consensus in Multi-vehicle Cooperative Control: Theory and Applications (Communications and Control Engineering) by Wei Ren, Randal Beard, 2007-12-12
Simulating Spacecraft Systems (Springer Aerospace Technology) by Jens Eickhoff, 2010-01-22
Knowledge Diffusion in the U.S. Aerospace Industry: Managing Knowledge for Competitive Advantage (2 Volumes) by Thomas E. Pinelli, Rebecca O. Barclay, et all 1998-02-02

lists with details

ENGnetBASE: Engineering Handbooks Online
All Categories. aerospace engineering. Biomedical Engineering. Chemical Engineering. Packaging.Systems Engineering. aerospace engineering. Avionics Handbook, The.
http://www.engnetbase.com/default.asp?id=395
Griffon Aerospace, Providing Aircraft Design, Aerovehicle Design (UAVs), And Com
Details on Griffons aerospace engineering facilities and their composite and aircraft design capabilities.
http://www.griffon-aerospace.com/
DASSAULT ESPACE
An overview of Dassault's aerospace engineering, vehicles studies, pyrotechnics, and telemetry systems.
http://www.dassault-aviation.com/espace/
Aerospace Engineering Program
aerospace engineering Program. Division of Engineering Sciences aerospace engineeringProgram. Program Chair Dr. CS Subramanian, P.Eng. (UK) Faculty. Full Time.
http://www.fit.edu/AcadRes/engsci/aero/aero.html

Extractions: Aerospace Engineering Program FITSAT AIRCOPS Research in the Aerospace Program at Florida Tech is conducted by five faculty members in three primary areas: combustion and propulsion, aerodynamics and fluid dynamics, and aerospace structures and materials. Basic and applied research are carried out in these areas through a variety of means, including theoretical, computational and experimental approaches. Research projects are funded by governmental and private sources, such as NASA, NSF, DOE, Florida Department of Transportation, the Florida Solar Energy Center and several industrial sponsors. Research facilities are shared with the Mechanical Engineering Program and encompass 11,400 square feet of experimental and computational laboratories. Existing laboratory facilities include: Fluid Mechanics and Aerodynamics Laboratories, which is equipped with a low-speed, low-turbulence wind tunnel* and a single-component laser Doppler velocimeter; the Center for Computational Fluid Dynamics, which is equipped with Sun Workstations; and the Materials and Structures Laboratory. Computational facilities are provided through the Computer-Aided Design Laboratory, which consists of 15 PC Workstations, a SUN Sparc-Station Server, plotter and various terminals networked to the campus network. Other computer facilities include two networked SUN Sparc-Station Microcomputers, three Macintosh computers and a number of personal computers used for control/data acquisition in the laboratories. In the discipline of fluid dynamics, some recent research has been sponsored by NASA Kennedy Space Center and has involved the fluid dynamics of leakage and leakage testing. The ultimate aim of this work is to reduce some of the uncertainties and increase the efficiency of the between-flight testing of the main engine compartment of the space shuttle orbiter. Suppose, for example, that a seal is designed to block the flow of liquid hydrogen. Suppose the seal has a flaw that forms a leak channel. Such a flaw will normally be detected by room temperature testing with gaseous helium. A room temperature test of gaseous helium leakage may or may not be useful in predicting the flowrate of liquid hydrogen through the same flaw according to how well one can or cannot model the capillary flow of liquids and gases through channels with noncircular cross-sections under a variety of endpoint conditions for the pressure.
MAE Redirect
Department of Mechanical and aerospace engineering
http://www.princeton.edu/~mae/MAE.html
Mechanical & Aerospace Engineering
College of Engineering. Department of Mechanical and aerospace engineering. OneWashington Square. San Jose, CA 951920087. (408)924-3850. (408)924-3995 Fax.
http://www.engr.sjsu.edu/mae/
Brendon Fuhs
Iowa State University student studying aerospace engineering. Includes his resume.
http://www.public.iastate.edu/~bfuhs/
MIT OpenCourseWare | Aeronautics And Astronautics | 16.901 Computational Methods
Introduction to computational techniques arising in aerospace engineering. 16.901Computational Methods in aerospace engineering, Spring 2003.
http://ocw.mit.edu/OcwWeb/Aeronautics-and-Astronautics/16-901Computational-Metho

Extractions: This Course Advanced search Course Home Syllabus Calendar ... Computational Methods in Aerospace Engineering, Spring 2003 16.901 Computational Methods in Aerospace Engineering, Spring 2003 Project 3 Highlights of this Course lecture notes assignments study materials , including coded examples and projects from Spring 2002. Course Description This course serves as an introduction to computational techniques arising in aerospace engineering. Applications are drawn from aerospace structures, aerodynamics, dynamics and control, and aerospace systems. Techniques include: numerical integration of systems of ordinary differential equations; finite-difference, finite-volume, and finite-element discretization of partial differential equations; numerical linear algebra; eigenvalue problems; and optimization with constraints.
Research By Subject: Aerospace Engineering
Research by SUBJECT. aerospace engineering. Background Information. Thefollowing is a selected list of resources in aerospace engineering.
http://www.library.arizona.edu/library/teams/set/aeropath.htm

Extractions: Summary of most units of measurement to be found in use around the world today (and a few of historical interest), together with the appropriate conversion factors needed to change them into a standard unit of the SI. The units may be found either by looking under the category in which they are used (such as length, mass, density, energy), or else by picking one unit from an alphabetically ordered list of units. Aerospace Facts and Figures TL501 .A818 Sci Ref
Aerospace Engineering Web Page
MAES program aerospace engineering Program Overview. Graduate programs in MASTER OF SCIENCE(MS). Mechanical and aerospace engineering. In both mechanical
http://www.aero.iitm.ernet.in/
AOE@VT: AOE Main Page
DEPARTMENT OVERVIEW. The Department of aerospace and Ocean engineering is a unique blend of two disciplines that takes advantage of commonality in the analysis and design of aerospace and ocean vehicles.
http://www.aoe.vt.edu/

Extractions: The Department of Aerospace and Ocean Engineering is a unique blend of two disciplines that takes advantage of commonality in the analysis and design of aerospace and ocean vehicles. Undergraduate and graduate degrees are offered in both disciplines. The Department has 19 faculty working in aero/hydrodynamics, structural mechanics, dynamics and control and multidisciplinary design optimization. We have a yearly graduation rate of some 60 Bachelor's, 25 Master's and 15 Doctorate degrees. All faculty are actively engaged in our broad research program, which has annual expenditures of $2.5 million, and all teach at the undergraduate and graduate levels. The Department has extensive facilities including world class wind-tunnels, water tunnels, structural test equipment, computer systems and a full-scale, full-motion flight simulator. NEWS
Competitive Engineering
Provides engineering, precision machining, manufacturing, as well as prototype and design services to the aerospace and high technology industries.
http://www.ceiglobal.com/
Welcome To GKN Aerospace
Manufacturer and supplier of structures, components, assemblies and engineering services to aircraft and aero engine manufacturers.
http://www.aero.gknplc.com/

Extractions: Overview GKN Aerospace Services is the aerospace operation of GKN plc. It is a global independent first tier supplier of structures, components, assemblies and engineering services to aircraft and aero engine manufacturers. It possesses expertise in all specialist aerospace manufacturing and design processes in addition to supply chain and logistics capability. With this unparalleled expertise, it offers to its customers optimum solutions, unbound by limits of capabilities, making GKN Aerospace Services a preferred partner to the major primes. It has eight centres of manufacturing excellence in Europe and the USA. These are located in St. Louis (complex machining and composites), Cowes (nacelles and major airframe structures), San Diego (specialist engine/airframe fabrications), Munich (large commercial composites), Tallassee (composites), Portsmouth (fuel cells and flotation systems), Luton (canopies and transparencies) and Yeovil (metallic components and structures). The integrated engineering arm of GKN Aerospace Services, which includes the activities of GKN Engage, employs almost 2,000 aerospace engineers, with access to a further 500 systems and software engineers through Aerosystems International, a joint venture between GKN and BAE SYSTEMS. The main offices of GKN Engage are in Weston-super-Mare, Avonmouth and Cowes with smaller facilities throughout the UK, and in Wallingford, Connecticut in the USA.
D-STAR Engineering
Diesel engines, diesel generators. Research, design, development of automotive, aerospace propulsion, and power systems.
http://www.dstarengineering.com/
Delva Tool And Machine Corporation Provides Precision Machining, Engineering And
Providing precision machining, engineering and mechanical assembly for the commercial, aerospace and military industries.
http://www.delvatool.com/

Extractions: Email: info@delvatool.com For over 40 years Delva Tool and Machine has been supplying custom precision machined parts to a variety of commercial and defense companies. Starting with the procurement of raw material or casting (both investment and die), Delva can finish your part through all special processes needed, including plating, painting, heat treating, and mechanical assembly. Currently Delva Tool and Machine has 20 pieces of CNC equipment. The milling department has 3, 4, and 5 axis milling capability with single and double spindle machines. The turning department equipment has single and double spindle machines, most with milling capability and automatic bar feeders. For more detail on our equipment please go to our Equipment List Delva Tool and Machine can work with your engineering staff in optimizing parts for producibility and cost-efficiency, whether a prototype or a high volume requirement.
Hamilton Sundstrand Technical Support
A large manufacturer of aerospace and industrial products, has created the value added services program providing customers with additional training, engineering services, and technical data information.
http://hsvas.excelcomm.com/

Extractions: Please Log In Welcome! Technical Support provides a way to easily request engineering services, training, or data on the airframes and applications your company uses. In order to do this, we need to know who you are! If you are new to our site, please fill out a User Profile Never been here? If you have never been to HSVAS before, you must create a User Profile before entering.
Icore International Group
The group of specialist engineering companies provides innovative, high performance solutions in the areas of electrical interconnect systems, fluid transfer, hydraulics and high current power connectors. Major customers are OEMs in the aerospace, defence, rail traction, automotive, naval and marine, mining, and power generation industries.
http://www.icoregroup.com/
Ball Aerospace & Technologies Corp.
Provides systems engineering services, and designs and manufactures complete space systems; spacecraft; space and Earth science instruments and sensors; cryogenic subsystems; antenna systems and video products for commercial and governmental customers.
http://www.ball.com/bhome/hspacebu.html

Extractions: Read our profile sheet on our aerospace subsidiary Go directly to our aerospace website Based in Boulder, Colo., Ball Aerospace is a subsidiary of Ball Corporation. Ball Corporation is one of the worlds leading suppliers of metal and plastic packaging to the beverage and food industries and had sales of $3.9 billion in 2002, of which approximately $500 million came from Ball Aerospace. Ball Aerospace employs approximately 2,500 people worldwide. Because of the company's broad expertise and world-class facilities, Ball Aerospace is able to serve a wide range of customers including NASA, the U.S. Department of Defense and a number of prime contractors from within the aerospace industry. Our aerospace subsidiary maintains its own more detailed website Legal Stuff
Tower Engineering
Subcontract precision engineers to the aerospace, automotive and composite industries.
http://www.tower-engineering.co.uk/

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

81-100 of 184 Back | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next 20