Geometry.Net - the online learning center
Home  - Technology - Safety Engineering
e99.com Bookstore
  
Images 
Newsgroups
Page 7     121-140 of 186    Back | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 10  | Next 20

         Safety Engineering:     more books (100)
  1. Fire Safety, Science and Engineering: A Symposium (Astm Special Technical Publication// Stp)
  2. Safety Engineering As Applied To Scaffolds by Travelers Insurance, 1915
  3. Safety Engineering and Risk Analysis, 1995: Presented at the 1995 Asme International Mechanical Engineering Congress and Exposition, November 12-17, 1 (Sera)
  4. Engineering safety assessment: An introduction by J. R Thomson, 1987
  5. Safety Engineering and Risk Analysis 1998 (Sera (Series), Vol. 8.) by Ga.) International Mechanical Engineering Congress and Exposition (1996 : Atlanta, 1996-01
  6. Human Factors Engineering for Forensic and Safety Specialists: Improper Design Can Lead to Product Mis-Use and Personal Injury by Wesley E. Woodson, 1998-04-01
  7. A simple reliability block diagram method for safety integrity verification [An article from: Reliability Engineering and System Safety] by H. Guo, X. Yang, 2007-08-01
  8. Fire safety of combustible materials: International symposium, October 1975, organised by [the] University of Edinburgh Centre for Industrial Consultancy ... the Department of Fire Safety Engineering
  9. The CSChE's role in PSM.(Guest Column)(Canadian Society for Chemical Engineering and Process Safety Management): An article from: Canadian Chemical News by Gerry Phillips, 2004-02-01
  10. GUIDE TO ASSESSMENT SAFETY DUN (Centre for Civil Engineering Research & Codes, Gouda, Report)
  11. New Pipeline Technologies, Security, and Safety: Proceedings of the Asce International Conference on Pipeline Engineering and Construction, July 13-16, 2003, Baltimore Marriott Waterfront Hotel, balt by M.D.) ASCE International Conference on Pipeline Engineering and Construction (2003 : Baltimore, 2003-06
  12. Safety Engineering and Risk Analysis: Presented at the 1993 Asme Winter Annual Meeting, New Orleans, Louisiana, November 28-December 3, 1993 (Sera (Series), V. 1.) by Ga.) American Society of Mechanical Engineers. Winter Meeting (1991 : Atlanta, 1994-06
  13. Engineering Safety (Mcgraw-Hill International Series in Civil Engineering)
  14. Smart Technologies for Safety Engineering

121. IEEE SSIT Home Page
Addressing such issues as environmental, health and safety implications of technology, engineering ethics and professional responsibility.
http://radburn.rutgers.edu/andrews/projects/ssit/default.htm
Navigation
SSIT Info
  • SSIT Business SSIT Activities Contacts

  • News
  • Latest News

  • Member Benefits
  • Conferences
    Newsletter

  • IEEE
  • IEEE Information

  • WWW Links
  • Organizations Online Journals Research Tools Education ... WWW Links
    The IEEE Society on Social Implications of Technology
    The Society on Social Implications of Technology (SSIT) of the Institute of Electrical and Electronics Engineers (IEEE) has about 2000 members worldwide. The scope of the society includes such issues as environmental, health and safety implications of technology; engineering ethics and professional responsibility; history of electrotechnology; technical expertise and public policy; peace technology; and social issues related to energy, information technology and telecommunications. SSIT publishes a quarterly journal, IEEE Technology and Society Magazine and sponsors periodic conferences entitled The International Symposium on Technology and Society (ISTAS). Membership in SSIT is open to all IEEE members and student members. Affiliate membership in SSIT is available to persons who are not members of IEEE. For more information on joining SSIT, please
  • 122. Fall Safety - Fall Protection Engineering - Welcome
    safety, engineering and training professionals who specialize in fall safety protection training, consulting, and legal support.
    http://www.fallsafety.com

    Contact Us
    and we will respond within 24 hours
    What's New: Visit DSC/Ellis Fall Safety Solutions at the 2004 ASSE Exposition in Las Vegas Click here to get the DSC 2004 Calendar TURNKEY FALL PROTECTION SERVICES
    • Assessment - the Direction; elimination or control Engineering - the Certification by a PE Installation - supervision of contractor's installation of engineered system Training - users trained on the new engineered system

    To provide optimum protection, any fall protection system DSC was founded by J. Nigel Ellis, Ph.D., CSP, P.E. and is an organization of experienced and qualified safety, engineering and training professionals dedicated to the implementation of Process Improvement (going beyond safety to uncover the roadblocks within the process that prevent employees from working safely and using PPE when required). With over 30 years experience, Dr. Ellis has trained over 20,000 managers and workers in fall protection techniques and procedures. Dr. Ellis has been a leading pioneer in the development of OSHA standards and systems for fall protection. As the author of Introduction to Fall Protection, 3rd Edition

    123. Purswell & Purswell, Engineering & Ergonomics, Inc.
    Consultant providing ergonomics and safety consulting services to manufacturers, government agencies, and attorneys in the following areas Traffic safety, Occupational safety, Product safety, Biomechanics, Work Physiology, Ergonomics/Human Factors, Warnings and Instructions (US).
    http://www.purswell.com/
    ADDRESS: 2035 Mulligan Drive, Colorado Springs , CO 80920-1603
    PHONE: FAX
    We provide ergonomics and safety consulting services to manufacturers, government agencies, and attorneys in the following areas:
    • Ergonomics/Human Factors Warnings and Instructions Occupational Safety and OSHA compliance issues Product Safety Biomechanics and Work Physiology Hand-Arm and Whole Body Vibration Warnings and Instructions Traffic Safety
    Schedule of Rates Schedule of Rates in PDF format Curriculum Vitae of Jerry L. Purswell, Ph.D ... Curriculum Vitae of Jerry L. Purswell, Ph.D., P.E. in PDF format. Jerry.Purswell@Purswell.com Curriculum Vitae of J.P. Purswell, Ph.D., P.E., CPE Curriculum Vitae of J.P. Purswell, Ph.D., P.E., CPE in PDF format
    JP.Purswell@Purswell.com Useful Links Information about and links to OSHA, including the rescinded Ergonomics Standard. Publications by NIOSH pertaining to Ergonomics and Safety Some useful transportation-related links Some professional societies which address ergonomics and safety ... The Consumer Product Safety Commission Website , including online access to the National Electronic Injury Surveillance System (NEISS) database and the 1975 and 1977 studies on the anthropometry of children.

    124. Hedweld Engineering Pty. Ltd.
    Specialising in SafeAway Access Systems for mining equipment, specialised mining maintenance and handling equipment, dragline and shovel bucket repair and maintenance, design and manufacture of mine safety equipment.
    http://www.hedweld.com.au
    A.C.N. 003 024 833 A.B.N.: 43 003 024 833
    Safe-Away Access Systems
    TriLift Handling Equipment
    Equipment
    Services
    Engineering Services

    Contact Information
    Company Profile
    Find Equipment By Machine or Manufacturer Help with the features of this Website Language Selection
    English, Spanish
    Hedweld Engineering Pty. Ltd.
    Home Safe-Away Access Systems ... Find Equipment by Machine or Manufacturer

    125. Graduate Studies In Occupational Safety
    Graduate programs in Occupational safety and Ergonomics. In the Industrial and Systems engineering Department. Degrees offered, admission requirements, financial assistance, degree requirements, courses, schedule, on and off campus program.
    http://www.eng.auburn.edu/ie/ose/
    Graduate Studies in
    INSY Homepage
    Auburn Homepage Auburn University
    Academic Program

    Admission Requirements

    Degree Offerings

    Degree Requirements
    ...
    Contact Us

    Website Contact: Nathan Dorris Last Modified: May 16, 2003

    126. NCECA - Northern California Engineering Contractor's Association
    Trade organization for all facets of the construction industry. Provides safety training, updates, member benefits, fundraisers, scholarships, and DOT Drug Program.
    http://www.nceca.org

    Site Map

    Our Mission:
    A member driven organization dedicated to the promotion of the engineering contractor industry through education and training, advocacy and community relations. NCECA
    Homepage sponsored by:
    Latest News Salamander panel says it's seeking balance Environmentalists object to closed meetings, lack of biologist in group ... ( More News Executive Committee Meeting at ECA office on 6/8/2004 3:00:00 PM ( More Events
    Click on Logo to log on to ClickSafety.

    127. The Safety And Reliabilty Society
    UK based society affiliated with the engineering Council. Lists branches, events, and enrollment details.
    http://www.sars.org.uk/

    128. EXCEL Services Corporation
    Provides consulting and project management services to help nuclear power providers and regulatory agencies solve complex operational, engineering, safety and regulatory issues.
    http://www.excelservices.com/

    129. MSES Consultants
    An environmental consulting firm providing services in the areas of planning, engineering, safety, industrial hygiene, the earth and environmental sciences, design and regulatory assistance. The firm is located in Clarksburg, West Virginia, USA.
    http://www.msesinc.com

    130. Mining Engineering - University Of Missouri-Rolla
    Offers lab safety manual and program information.
    http://www.umr.edu/~mining/

    Mining Engineering Department
    Mining Factoid The U.S. mining industry is pointed to throughout the world as the example of how to mine in an environmentally sustainable manner.
    Mining Laboratory Safety Manual

    Entry Level Salaries now Available!
    226 McNutt Hall
    Rolla, Mo. 65401
    PH: (573)-341-4753
    FX: (573)-341-6934
    mining@umr.edu
    Greetings and welcome to our small rest area on the information super highway. Here we have assembled some helpful information about the department and the people that make it possible. If you are interested in joining us for an exciting future in the Mining Industry, please browse through our page and if you have any questions, please contact us via e-mail, telephone or drop by the department and talk to us personally.
    2004 Mucking Champions
    On-line Classes - SS 2004
    Commercial Pyrotechnics Operations - Min 309
    Registration is now open for
    FS 2004
    Let everyone see that you are a UMR graduate. For information on how to purchase this

    131. LIFE/SAFETY SYSTEMS, INC.
    Design, engineering, supply, inspections and certifications.
    http://lifesafetysystems.com
    LIFE/SAFETY SYSTEMS, INC. 1999.

    132.  Recreation Engineering, Inc.
    Specializes in accelerometry and maintenance and safety surveys, offers engineering, testing, inspection and incident investigation.
    http://www.RecreationEngineering.com/
    Recreation Engineering, Inc. The Amusement Industry's Solution to Safety and Maintenance Challenges VISIT OUR NEW ON-LINE TRAINING WEBSITE
    www.USTTC.com
    Recreation Engineering, Inc.
    10624 S. Eastern Ave. - Suite A446, Henderson, NV 89052
    Fax:(
    SMARTs
    Safety and Maintenance Amusement Ride Tips
    Click Here to Get SMART
    SAFER AMUSEMENT RIDES THROUGH INSPECTION
    SAFER AMUSEMENT RIDES FROM TESTING

    SAFER AMUSEMENT RIDES BY DESIGN Recreation Engineering's staff of engineers and specialists has been consulted in the areas of safety, mechanical design, training, mechanical testing, safety research, litigation support, maintenance, operation, ride certification and manual preparation. Project experience includes inspection and testing of thousands of amusement rides. REI specializes in accelerometry ASTM F-24 code committee and is active in promoting safety and education throughout the amusement industry. In fact, REI personnel have supported both NAARSO and AIMS Safety Seminars for over a decade. REI inspects amusement equipment worldwide . REI is a Clark County, Nevada listed Quality Assurance Testing and Inspection Agency. REI is also listed in the City of Las Vegas.

    133. TIFS: Technical Institute Of Food Safety
    Offers for sale a book engineering for Food safety and Sanitation . List of contents and notes on the authors.
    http://www.tifsinfo.com/
    TECHNICAL INSTITUTE OF FOOD SAFETY (TIFS) 27 Eastmount Road
    Medfield, MA 02052
    508/359-9559 FAX Sunday June 06th, 2004 Home Mission More Information Order ... Email ENGINEERING for FOOD SAFETY
    and SANITATION
    2nd Edition A Guide to the Sanitary Design of Food Plants and Food Plant Equipment
    What's New
    • All chapters revised and expanded
    • Nearly 100 pages longer
    • New chapter on paints and coatings
    • Over 75 additional illustrations making a total of nearly 350 drawings, photographs, and tables to illustrate each concept
    • All line drawings updated and redrawn
    • New glossary
    • Expanded Table of Contents and Index for easy reference
    • Chapter headings and subheadings make specific searches for information easy
    • Quick reference guide to drawings, photographs, and tables makes it easy to find a quick, visual answer to almost any question
    This second edition of Thomas J. Imholte's classic reference work on sanitary food plant design has been completely revised (publication date August 1999 ). It builds on the first edition's recognized strengths, adds new information, and updates every topic with the latest practices and technologies. The second edition has nearly 100 additional pages and has been designed for ease-of-use. New illustrations have been added and all of the original drawings have been updated and redrawn. You can find out more about this book, our

    134. Bentim Engineering - Specialists In Machine Guarding, Steel Fabrication And Shee
    Machine guarding, sheetmetalwork, welding, rolling, steel fabrication, guards, engineering, stairways, safety grilles, painting, polishing, design service.
    http://www.bentim.dial.pipex.com/
    Bentim Engineering was established in 1983, due to our high engineering standards, and our ability to understand the needs and requirements of our clients we have built a solid foundation of regular customers.
    We have many years of experience in a variety of fields, including sheetmetal work, general fabrication, industrial reservoir manufacture and small steel structures in mild steel, stainless steel and aluminium. We are also specialists in the manufacture of machine guarding, offering an inspection and advisory service on existing guarding systems.
    Bentim Engineering is an ISO 9001 Registered company

    135. Vico Engineering Ltd. Suppliers Of Heavy Clay Industry Related Machinery. New, S
    UK. Specializes in supply of new and refurbished equipment and parts for the brick making industry. Selection includes sanding machines, conveyors, gripper heads, and safety switch devices.
    http://www.vico-engineering.co.uk/
    www.vico-engineering.co.uk Vico Engineering was established in 1973 and has provided a strong reliable service to the heavy clay industry.
    We specialise in supply of machinery, and second-hand refurbished machinery including sanding machines, conveyors, gripper heads, buffer pads and safety switch and safety switch lanyard systems.
    We also supply spare parts for any british or continental brick making machines including all extruder parts such as worm sections, mixers, pan mills etc. Please click here , or on our logo to enter the website.

    136. BUTLER Engineering & Marketing | The Leading Company In Innovative Tyre Service
    Manufacturer of tire changers, safety cages and innovative nitrogen inflation systems. Bilingual, English and Italian. Firm in Modena, Italy.
    http://www.butler-eng.com
    Click here to enter or wait a few seconds to be redirected to our home page. This site is best viewed with MS Internet Explorer 5.5 or higher (800x600-65kcols.)

    137. Abrasive Blast Cleaning Equipment From Kelco Sales And Engineering Co.
    Manufactures broad range of blast cleaning equipment. Includes cabinets, rooms, safety equipment, accessory items, and selection of packaged units. Site provides detailed product and usage information.
    http://kelcosales.com
    Manufacturer of abrasive blast cleaning equipment including portable blast pots, pressure blast cabinets, syphon blast cabinets, airblast tumblers, blast rooms, automated blast systems, airless blast machines and safety equipment.
    Kelco Sales and Engineering has more than 100 years experience in the engineering and manufacturing of abrasive blast cleaning machines. Kelco Sales is a leading pioneer in the field. Our blast cleaning machines are advanced in design and unmatched in quality and performance. We are very proud that many of our innovative designs have been adopted and used as standards by the industry.
    Our facilities total 48,000 square feet, including a machine shop, welding shop, fabrication shop and CAD department. Our staff employees include mechanical engineers and national board qualified welders with combined experience of hundreds of years in the blast cleaning industry.
    Thank you for visiting us. Feel free to browse around and be sure to let us know if we can help you in any way. For more information, contact us at (562) 868-9861 or E-Mail us at info@kelcosales.com

    138. The Yellow Book
    A handbook, published by Railtrack on behalf of the UK rail industry, designed to help people involved in changes to the railway contribute to improved safety.
    http://www.yellowbook-rail.org.uk
    The Yellow Book Web Site describes Engineering Safety Management for the UK's railways and has an electronic version of the Yellow Book. Please note that use of this site is also subject to further Terms and Conditions Yellow Book website Version 2.0, 2 October 2003
    Home
    The Yellow Book Resources Training ... Terms and Conditions

    139. Safety Engineer Jay Preston
    Production safety consultation and engineering services. Based in Los Angeles, California.
    http://www.safetybiz.com/
    Jay W. Preston, CSP, PE Safety Engineering Accident Prevention Consulting.......Forensic Safety Engineering.......Accident Investigation.......Accident Reconstruction.......Safety Training.......College Safety Instruction.......Emergency Preparedness.......Safety and Accident Prevention Expertise and Experience.....Expert Witness...... Click: PLEASE SEE SPAM WARNING BELOW!! Click for Resume Human Factors MAIN PAGE Yujin Preston '79-'99 Search for Specifics:
    Safety Services and Accident Prevention
    Call: (323) 776-3464 for service. Fax: (310) 645-8788. E-mail preston@safetybiz.com Accident Prevention Consulting will help your business or industry prevent accidents, injuries, illnesses, and other losses, and control such costs, and develop accident, illness, and injury prevention programs (IIPP), including such elements as INSPECTIONS and Federal and State OSHA and MSHA compliance. Improve your bottom line. Safety Expert Witness Service or forensic safety engineering will help you in civil and regulatory legal actions to determine accident causation, means by which accidents, injuries, illnesses, and related losses could be prevented, and applicable codes and standards. I assist clients with ATTORNEY NEWS Get better results for your clients.

    140. Chase Engineering
    Fire Protection engineering Consultants specializing in automatic sprinkler system design and engineered life safety studies for highrise apartment buildings. Professional engineering licenses in Florida and Vermont.
    http://www.chaseengineering.com

    Home

    Services

    Qualifications

    Contact Info

    40 Overlake Drive
    Milton, VT 05468
    Phone: (802) 893-7900
    Fax: (802) 893-1053
    fpe@chaseengineering.com
    Welcome to CHASE ENGINEERING
    Chase Engineering is a Fire Protection Engineering Consulting Firm owned and operated by Matt Chase, P.E., located in the Burlington, Vermont area. Matt is a licensed Professional Fire Protection Engineer with a Master's Degree in Fire Protection Engineering. Chase Engineering is committed to providing expertise in the area of Fire Protection and Life Safety Design. Our goal is to provide our clients with the highest level of fire safety in the appropriate fire protection design. The company's experience with a broad range of building occupancies and special hazards enables Chase Engineering to produce specialized designs to meet the specific needs of each facility. Matt Chase is a licensed professional competent to develop designs, review designs, consult and make recommendation on a wide variety of Fire Protection issues. Fire Protection issues include: protection of life from fire, protection of property from fire and compliance with local, state and federal building codes. Chase Engineering is best qualified to address these issues because of our specialized education, training, experience and licensure which enables us to view fire protection systems in an overall design context to provide an integrated Fire Protection solution. Services provided by Chase Engineering include;

    Page 7     121-140 of 186    Back | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 10  | Next 20

    free hit counter