Geometry.Net - the online learning center
Home  - Technology - Metrology
e99.com Bookstore
  
Images 
Newsgroups
Page 7     121-140 of 173    Back | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | Next 20

         Metrology:     more books (100)
  1. Advanced Mathematical Tools in Metrology III (Series on Advances in Mathematics for Applied Sciences)
  2. Metrology, Inspection, and Process Control for Microlithography Xvi
  3. Advances in Data Modeling for Measurements in the Metrology and Testing Fields (Modeling and Simulation in Science, Engineering and Technology)
  4. Properties and Metrology of Surfaces. (Proceedings 1967-68, International Conference at Oxford) by The Institute of Mechanical Engineers, 1968
  5. Metrology, Inspection, and Process Control for Microlithography X (Proceedings of SPIE)
  6. Three-Dimensional Imaging, Optical Metrology, and Inspection V: Proceedings of Spie 19-20 September 1999 Boston, Massachusetts (Proceedings of Spie--the ... Society for Optical Engineering, V. 3835.)
  7. Flat Panel Display Technology and Display Metrology II (Progress in Biomedical Optics and Imaging,)
  8. Metrology, Inspection, and Process Control for Microlithography XVII: 24-27 February, 2003, Santa Clara, California, USA (Proceedings of SPIE)
  9. Advancing Metrology for Electrotechnology to Support the U.S. Economy by Joanne Surrette, 1997-06
  10. Integrated Circuit Metrology, Inspection, and Process Control IV (Spie Proceedings, Vol 1261)
  11. Digital Linear and Angular Metrology
  12. Metrology, Inspection, And Process Control For Microlithography (Proceedings of SPIE)
  13. Integrated Circuit Metrology, Inspection, and Process Control VI: 9-11 March 1992 San Jose, California (Proceedings of S P I E)
  14. Metrology for Quality Control in Production by Zhaoqian Meng, 1989-10

121. Metrology Jokes
metrology Jokes. Joke1 Joke 2 As you can see, we re running a little low in the metrology joke department. In fact, only a
http://www.hartscientific.com/funstuff/jokesubmit-mail.htm
Temperature Calibration and Measurement Equipment
(Fax) 801.763.1010 Request a
Metrology Jokes Joke 2: As you can see, we're running a little low in the metrology joke department. In fact, only a few people have ever heard a metrology joke. If you know of one, please fill out the form below. If it's funny, or close to being funny, (and it's clean) we'll post it. Submit as many as you like. The employees of Hart Scientific shall be the sole judges of what jokes we put on the web. While it's true most of our employees have little or no sense of humor, we have identified three that do so we're qualified to do the judging. Name Title Company Address Address 2 City State Zip/Country Telephone FAX E-mail Type in your joke here and then press the submit button Home What's New Products Support ... Contents Send mail to webmaster@hartscientific.com with questions or comments about this web site.
Hart Scientific, Inc.
Last Modified:

122. Metrology Institute Of The Republic Of Slovenia
MIRS is responsible for matters concerning standardization, metrology, and accreditation in the areas of precious metals, scientific and legal metrology. Laboratory ceenter in Celje, and headquarters in Ljubljana.
http://www.usm.mzt.si/ENGLISH/

123. Semiconductor Optics: Products + Services: Metrology Instruments
tropel precision optics, tropel metrology instruments , FlatMaster™. go, corning home semiconductor optics products + services metrology instruments ,
http://www.corning.com/semiconductoroptics/products__services/metrology_instrume
inside semiconductor optics products + services semiconductor
optics
... metrology instruments tropel metrology instruments for submicrometer flatness measurement.
product information
FlatMaster 40 product sheet FlatMaster 100 product sheet FlatMaster 200 product sheet
for rapid, full-form measurement of precision flat surfaces.
product information

FlatRuler 200 product sheet

for cylindrical surface measurement.
product information

CylinderMaster 25 product sheet

for real-time, in-process flatness measurement of the entire wax mount wafer polishing process.
product information
PolishCheck product sheet for Non-Contact surface roughness product sheet Lasercheck is a registered trademark of Optical Dimensions LLC Corning is an exclusive distributor of LaserCheck. for automated wafer flatness analysis. product information product sheet return to top corning.com ... inside corning

124. Certified Measurements
Instrument calibration and metrology lab.
http://www.cmi-labs.com/
thisPage._location = "/CMI_Web/default.asp"; General Information Customer Login CMI Software Site Map Certified Measurements, Inc. , CMI, is a full service metrology laboratory offering traceable calibration and repair of electronic, dimensional, force, pressure and temperature measuring instruments. Our A2LA Accredited lab located in Centerville, Georgia has been serving industry for over 20 years. CMI is also pleased to service your calibration needs in our Marietta, Georgia facility. Contact CMI today at either location for all of your calibration needs.
Certified Measurements, Inc.

General Information and Price Guide
CMI.Live!

Access to your reports and documen ts
CMI Software
BenchTop™ Support
BenchTop™ - CMI's renowned calibration laboratory management software
Hits since April 23, 2003.

125. Northrop Grumman > Space Technology > Capabilities
ST Home Capabilities Products and Services metrology Test Equipment. metrology Test Equipment. Northrop Grumman metrology is proud
http://www.st.northropgrumman.com/capabilities/SiteSection.cfm?SectionID=28

126. Turbine Flowmeters, Positive Displacement Flowmeters, Flow Sensors, & Flow Measu
Turbine flow meters and custom designed flow measurement systems for users in the automotive, aerospace/defense, process/manufacturing and metrology industries.
http://www.ftimeters.com
SOLUTIONS BY INDUSTRY Aerospace/Defense Automotive Industrial Metrology Sanitary Fuel Metering OEM Diesel Engines Auto Emissions
Aerospace
Automotive
Industrial
Metrology
Sanitary
Fuel Metering
OEM
FuelCom
Auto Emissions Flow Technology's flow measurement products include high-accuracy turbine
flowmeters, positive displacement flowmeters, advanced flow controls and electronics that enhance flow metering performance. We also provide a variety of flowmeter calibrators, bell provers and portable flow transfer standards, and maintain one of the world's largest primary standard flow calibration laboratories.
Home About Us Products Resources ... Contacts Phone: 602.437.1315 Fax: 602.437.4459 Tollfree: 800.528.4225

127. Metrology
Translate this page
http://metwww.epfl.ch/ActivE.htm
This web page uses frames, but your browser doesn't support them.

128. N&k Technology
Manufactures equipment for thin film metrology and characterization, critical dimension and optical properties measurements.
http://nandk.com/

129. Categories : Semiconductor Metrology

http://www.thermo.com/metrology

130. Allan Variance -- Overview By David W. Allan
Core algorithm of international time scale has multiple metrology applications, from atomic clock frequency characterization to definition of the meter. Equation, explanation and publications.
http://www.allanstime.com/AllanVariance/
David W. Allan's
Time Interval Metrology Enterprise New Unified Field Theory Research Publications Truth is Light Home Search
Contents

New
...
Newsletter
(Page Navigation)
UFT
Unified Field
Theory
Overview ... Official Time (U.S.)
accurate to 0.4 seconds
UTC
You are here: Allan's TIME Publications
The Allan Variance
Description:
Clock algorithm in the generation of international time. Other metrology applications range from characterizing any precision clock or oscillator to the definition of the meter.
Page Index:

Brief Explanation
Equation Detailed Explanation Relevant Publications ... Related Sites Allan Variance Forum
Brief Explanation
Allan variance equation where the variance is taken on the variable y. Each value of y in a set has been averaged over an interval J y denotes the first finite difference of the measures of y; i.e. if i denotes the i th measurement of y, then y = y i+1 - y i . In total, each adjacent finite difference of y is squared and these then are averaged over the data set and divided by 2. The divide by two causes this variance to be equal to the classical variance if the ys are taken from a random and uncorrelated set; i.e. white noise.

131. T U R B I N E M E T R O L O G Y L L C
Specialist in Circular Geometry Inspection (CGI) of gas turbine, jet engine, and automotive components. Paragon System, turnkey workstations, hardware, software, training, consulting.
http://tmetrology.com/
var TlxPgNm='index'; T U R B I N E M E T R O L O G Y L L C Home About Us What's New? Events Info ... Contact Us
Turbine Metrology LLC CUSTOM-DESIGNED METROLOGY SOFTWARE AND SYSTEMS FOR GAS TURBINE, AEROSPACE, AND AUTOMOTIVE APPLICATIONS PARAGON at the Controls Exhibition Sinshe im, Germany

132. Old Babylonian Metrology
The metrology of ancient Mesopotamia is very complicated, but key to understanding much of the mathematics as units are often silently converted in the middle
http://it.stlawu.edu/~dmelvill/mesomath/obmetrology.html
Old Babylonian Weights and Measures
The metrology of ancient Mesopotamia is very complicated, but key to understanding much of the mathematics as units are often silently converted in the middle of a problem. Units of length, weight, area, capacity and so on and the relationships between them changed frequently in both space and time. However, by the Old Babylonian period, the systems were much simpler than during the Sumerian period. For the large bulk of mathematical problem texts, there is a relatively standardized set of measurements, although there are plenty of exceptions. The tables below give the main units in this standard set, but are by no means comprehensive. For up-to-date and detailed references on the different systems, see the articles by Marvin Powell in RLA and Civilizations of the Ancient Near East Even in the Old Babylonian times, metrology had a rich collection of units. Most of the conversion factors are simple fractions or multiples of the base 60. Key units are the kush (cubit) for length, sar (garden-plot) for area and volume, sila for capacity and mana for weight. At the base of the system is the barleycorn, she, used for the smallest unit in length, area, volume and weight. Akkadian made use of a letter š called a shin, pronounced as 'sh'. The barleycorn is a 'še', pronounced 'shay' and which we shall write as 'she.'

133. Metrology Institute Of Japan
metrology Institute Of Japan. The metrology gigascopic world. Structure Of Mij Departments metrology Institute of Japan(MIJ) (Tsukuba Center)
http://www.aist.go.jp/aist_e/ressearch_units/research_section/mij/mij_main.html
Metrology Institute Of Japan
Structure Of Mij Departments
Metrology Institute of Japan(MIJ)

(Tsukuba Center)
Time and Frequency Division
Time Standards Section, Wavelength Standards Section Electromagnetic Waves Division
Radio-Frequency Section, Electromagnetic Fields Section Lengths and Dimensions Division
Length Standards Section, Dimensional Standards Section Quantum Radiation Division
Ionizing Radiation Section, Radioactivity and Neutron Section, Optical Radiation Section Mechanical Metrology Division
Mass and Force Standards Section, Pressure and VacuumStandards Section, Legal Weighing Metrology Section Inorganic Analytical Chemistry Division
Inorganic Standards Section, Environmental Standards Section Acoustics and Vibration Metrology Division Acoustics and Ultrasonics Section, Vibration and Hardness Section Organic Analytical Chemistry Division Organic Standards Section , Polymer Standards Section Temperature and Humidity Division Thermometry Section,Cryogenic Thermometry Section,Radiation Thermometry Section, Humidity Standards Section

134. Gravioceanic Measurement Solutions
Software and hardware solutions for metrology.
http://free-zg.htnet.hr/gravioceanic
Zanima Vas mjeriteljstvo? Interested in metrology? Dobrodosli! Welcome! Mjeriteljski programi : Metrology Software : GraviSimple 1.01 - Umjeravanje laboratorijskog volumetrijskog posudja vaganjem GraviSimple 1.01 - Calibration of laboratory glassware - gravimetric method PsihroMet 1.0 - Odredjivanje relativne vlage zraka psihrometrom bez tablica PsihroMet 1.0 Two liquid-in-glass thermometers for determination of relative humidity without the use of tables GraviSoft 2.0 - Umjeravanje laboratorijskog posudja programom koji kontrolira cijeli proces GraviSoft 2.0 - Calibrate Your glassware almost automatically Oprema/Planovi/Ostalo Hardware/Plans/Other e-mail GraviOceanic - metrology solutions Najbolje na 1024x768 Best at

135. Metrology Program
metrology PROGRAM, The metrology Program maintains, in concert with the National Institute of Standards and Technology, the State standards of measurement.
http://www.cdfa.ca.gov/dms/InfoGuides/Metrology.htm
California Home CDFA Home Doing Business with CDFA Site Map ... Contact DMS
My CA
METROLOGY PROGRAM The Metrology Program maintains, in concert with the National Institute of Standards and Technology, the State standards of measurement. These physical standards form the basis for all California transactions involving weight or measure. METROLOGY PROGRAM
INFORMATION GUIDE RESOURCE
INFORMATION
Click on graphic for full version (pdf) (412KB) Work Request Log (pdf) (73KB) Calibration Services Price List (pdf) (104KB) (pdf) (82KB) Service Agency Certification Sources (pdf) (71KB) INFORMATION GUIDE SECTIONS OTHER LINKS Program Introduction (pdf) (55KB) General Terms and Definitions (pdf) (73KB) National Conference of Standards Laboratories International Frequently Asked Questions (pdf) (140KB)

136. Matt Young's Home Page
Professor at Colorado School of Mines. Lists courses taught, science and religion, optics, optical communications, metrology, biography, books and publications.
http://www.mines.edu/~mmyoung/
Matt Young
Contact Information:
Matt Young Department of Physics Colorado School of Mines Golden, CO 80401 USA Phone: (303) 273-3862 Fax: (303) 273-3919 email: mmyoung [at-sign] mines.edu
Education:
  • PhD, Institute of Optics, University of Rochester, 1967
Research Interests:
  • Optics, optical comunications Science and religion
Teaching Interests:
Books by Matt Young Why Intelligent Design Fails: A Scientific Critique of the New Creationism
Matt Young and Taner Edis , eds., Rutgers University Press, 2004, in press. No Sense of Obligation: Science and Religion in an Impersonal Universe
1st Books Library, 2001, www.1stBooks.com/bookview/5559 Optics and Lasers, Including Fibers and Optical Waveguides , 5th ed., Springer, New York, 2000. The Technical Writer's Handbook , University Science Books, Mill Valley, California, 1989.

137. VICIM-INTRO
Translate this page VICIM (Virtual Institute for Chemometrics and Virtual metrology)
http://www.vicim.urv.es/

138. National Institule Of Metrology (Thailand)
Laboratories with departments of chemical, dimension, electrical and mechanical metrology in Thailand.
http://www.nimt.or.th/nimt_en/index.asp
NIMT's Electrical, Length, Mass and Presssure Laboratory ä´éѺ¡ÒѺͧ¤ÇÒÁÊÒÁÒ¶Ëéͧ»¯ÔºÑµÔ¡Ò ISO/IEC 17025 ¨Ò¡ DKD (German Calibration Service) Ê˾ѹ¸ÊҸҳѰàÂÍÁѹ àÁ×è;ÄÉÀÒ¤Á 2545
Login Password Sign up Cal lab in Thailand Links DKD Certificate ...
MoU
Surveys NIMT Industry surveys Model Membership The procurement
under loan agreement

Calibration News More... Gravity Chart
  • Click
  • Training More... 06 Jun 2004 About NIMT
    Welcome Message
    History

    Policy and Planning

    ACT B.C.1997
    ...
    Others
    Metrology Knowledge MRA SI unit International Recognition Traceability Chain ... Articles Calibration Services Price List All Web Site in MOSTE Working Team NIMT Laboratory + Department of Machanical Metrology Acoustic and Vibration Laboratory Force and Torque Laboratory Mass Laboratory Pressure and Vacuum Laboratory ... Volume and Flow Laboratory + Department of Electrical Metrology Electrical Laboratory Time and Frequency Laboratory + Department of Dimension Metrology Length Laboratory + Department of Temperature Temperature Laboratory + Department of Chemical Metrology Chemical Laboratory Technical Development Overview Traceability Chart Capability List Interlaboratory Comparison ... Articles Training

    139. Metrology And Measurement Systems
    metrology and Measurement Systems is a refereed journal of Committee of Measurement and Scientific Instrumentation of Polish Academy of Sciences.
    http://www.metrology.pg.gda.pl/
    METROLOGY AND MEASUREMENT SYSTEMS Committee of Measurement and Scientific Instrumentation, Polish Academy of Sciences
    Komitet Metrologii i Aparatury Naukowej Polskiej Akademii Nauk Main Page Instructions for authors Subscription Archives ... Messages
    Index 330930
    ISSN 0860-8229 POLISH ACADEMY OF SCIENCES COMMITTEE OF MEASUREMENT AND SCIENTIFIC INSTRUMENTATION
    METROLOGY
    AND MEASUREMENT SYSTEMS
    METROLOGIA I SYSTEMY POMIAROWE
    VOLUME XI - NUMBER 2/2004

    QUARTERLY
    WARSAW 2003 Editorial Board
    and Programme Committee
    Instructions for authors Subscription information ... Section IV of PASc Metrology and Measurement Systems is a refereed, international-reach journal of the Committee of Measurement and Scientific Instrumentation, Polish Academy of Sciences. Contributions are invited on all aspects of the research, development and applications of the measurement science and technology. Topics covered include: general principles of measurement; sensors and transducers; measurement data acquisition; measurement signal transmission and processing; measurement systems and microsystems; internet and wireless communication-based measurements; virtual and AI-based instruments; design and manufacture of instruments. Liczba wizyt od 7.10.2002:

    140. Manufacturing Engineering Laboratory - Working With Industry To Develop And Appl
    Manufacturing Engineering Laboratory. Works to satisfy the measurements and standards needs of U.S. manufacturers in mechanical and dimensional metrology and in advanced manufacturing technology by conducting research and development, providing services, and participating in standards activities.
    http://www.mel.nist.gov/
    About MEL What MEL does MEL Organization What's New ... Publications Selected Programs SIMA Systems Integration for Manufacturing Applications IMS Intelligent Manufacturing Systems Search NIST Webspace type text
    Contact a staff member
    NIST home page MEL Research Areas Calibration Research: length, mass, force, acceleration, acoustical pressure, measurement uncertainty Material Removal Processes: milling, turning, grinding, lapping, polishing Coordinate and Machine Tools: CMMs, laser trackers, probes, performance, condition based maintenance Laser and Optics: interferometry, striae, air refractivity, surface finish, EUVL Surface and Nano: roughness, stylus instruments, interferometry, STM, AFM, SEM, Linewidth, photomasks Interoperability / Integration: sensor interfacing and networking, open architecture control, product data standards, conformance testing, STEP Simulation, Visualization and Modeling: Simulation architectures and interfaces, distributed simulation standards, neutral models and prototypes Intelligent Systems: knowledge engineering, planning, learning

    Page 7     121-140 of 173    Back | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | Next 20

    free hit counter