Geometry.Net - the online learning center
Home  - Technology - Metrology
e99.com Bookstore
  
Images 
Newsgroups
Page 5     81-100 of 173    Back | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | Next 20

         Metrology:     more books (100)
  1. Veeco Instruments: world leader in 3D surface metrology.(2004 Corporate Spotlight): An article from: Advanced Materials & Processes
  2. Integrated Circuit Metrology, Inspection, and Process Control, V: Proceedings (Proceedings of Spie, Vol 1464) by William H. Arnold, 1991-06
  3. Contributions to Arabic metrology, II: Early Arabic glass weights and measure stamps in the Benaki Museum, Athens, and the Peter Ruthven Collection, Ann Arbor, (Numismatic notes & monographs) by George Carpenter Miles, 1963
  4. Characterization and Metrology for Nanoelectronics: 2007 International Conference on Frontiers of Characterization and Metrology (AIP Conference Proceedings ... / Materials Physics and Applications)
  5. Characterization and Metrology for ULSI Technology 2005 (AIP Conference Proceedings / Materials Physics and Applications)
  6. Metrology, Inspection, and Process Control for Microlithography Xiii: 15-18 March, 1999, Santa Clara, California (Proceedings of Spie--the International Society for Optical Engineering, V. 3677.)
  7. Advances in Fabrication and Metrology for Optics and Large Optics (Spie Volume 966)
  8. Eighth International Symposium on Laser Metrology: Macro-, Micro, And Nano-technologies Applied In,,,
  9. Uniform Laws & Regulations in the Areas of Legal Metrology & Engine Fuel Quality
  10. Recent Advances in Metrology, Characterization, and Standards for Optical Digital Data Disks: 21-22 July 1999, Denver, Colorado (Proceedings of Spie--the ... Society for Optical Engineering, V. 3806.)
  11. Industrial Vision Metrology: 11-12 July, 1991, Winnipeg, Manitoba (Proceedings of S P I E)
  12. Industrial Optical Sensing and Metrology: Applications and Integration : 10 September 1993 Boston, Ma./Volume 2066 (Proceedings of Spie--the International Society for Optical Engineering, V. 2066.)
  13. Characterization and Metrology for ULSI Technology: 2003: 2003 International Conference on Characterization and Metrology for ULSI Technology (AIP Conference Proceedings)
  14. Prof. Sleuth's bag of tricks--5 Enterprise Metrology steps.(QM Enterprise Metrology Sleuth)(Column): An article from: Tooling & Production by Gale Reference Team, 2006-12-01

81. SSfM Home Page
How can we improve the site for you? Email Address, Full Feedback Form, Welcome to the home of Software Support for metrology.
http://www.npl.co.uk/ssfm/
The UK's National Measurement Laboratory Advanced Search SS f M2 Home ... Training Themes Modelling Techniques Standards Support Support for NMS Knowledge Transfer ... MetroS Home Keep informed of SS f M news and events by joining our mailing list: To send feedback on this site please click the link below. Feedback NPL Home Science E-Store ... NPL Publications How can we improve the site for you? Email Address Full Feedback Form
Welcome to the home of Software Support for Metrology
Contact Us Website Map Science
SS f M-2 is the second metrology focused programme comprising projects designed to meet the requirements of other NMS programmes. It tackles a wide range of generic issues, some of which are problems in metrology that require the application of established software engineering practices, whilst others require advances in mathematics, software engineering or theoretical physics. Thus, the programme includes work in metrology, mathematics, software and theoretical physics, but with strong links between the disciplines. SS f M-2 includes both research and development activities and technology transfer.

82. The ITS-90 Resource Site, Temperature And Scales
Temperature scale and general temperature information for metrologists, scientists, calibration engineers and those with an interest in temperature metrology.
http://www.its-90.com/
The Internet resource for the International Temperature Scale of 1990 Temperature Scale and General Temperature information for metrologists, scientists, calibration engineers and those with an interest in the temperature scale and its realisation
The Water Triple Point
Keep informed of updates and site news
add your email address here.
Subscribe Unsubscribe NEW: Freeware Uncertainty Calculator Update
ITS-90 Text
Books Courses ... On-line Reference

83. J. H. Metrology
Calibration and repair of electronic and physical/dimensional test equipment.
http://www.jhmetrology.com
A Full Service
Calibration Laboratory
Traceable to N.I.S.T. Typical Types of Equipment Calibrated Request a Calibration Quote Certifications
ISO/IEC 17025
ISO 9002 Map to Facility Current Client Locations Used Test Equipment for Sale Customer Login
1801 Hicks Road, Unit E
Rolling Meadows, IL 60008
TEL: 847.991.0290
FAX: 847.991.0348
staff@jhmetrology.com

Home
Types of Equipment Request a Quote ... News ELECTRONIC AND PHYSICAL/DIMENSIONAL CALIBRATION SERVICES J.H. Metrology Co., Inc., founded in 1974, is a full service laboratory devoted to excellence in calibration and repair of electronic and physical/dimensional test equipment. We offer on-site calibration (within your facility) to accommodate the customer with large quantities of equipment to calibrate, eliminating downtime or expense of sending the equipment out, and for equipment too large to move. Our facility is located at Hicks Road just one block north of Euclid Avenue at the interchange of Illinois Route 53 and Euclid Avenue in Rolling Meadows, Illinois (see map page). Expertly staffed, and well equipped with a large and diversified number of primary, secondary, and working standards, allows J.H. Metrology Co., Inc. to perform calibrations to the rigid specifications of quality conscious customers.

84. Mikes
Mittatekniikan keskus Mätteknikcentralen Centre for metrology and Accreditation, Uutisia. 2004 12th International metrology Congress 2005. Tyhjiökysely.
http://www.mikes.fi/
Mittatekniikan keskus
M¤tteknikcentralen
Centre for Metrology and Accreditation MIKES FINAS Metrologia Tilauskori ... p¥ svenska Uutisia
12th International Metrology Congress 2005

Tyhji¶kysely

Maailman metrologiap¤iv¤ 20.5.2004
Kaikki Uutiset ... Koulutus Mittatekniikan keskus PL 239 L¶nnrotinkatu 37 00181 HELSINKI Puh (09) 616761 Fax (09) 6167467 Browser Info

85. Nextec 3D Non Contact Laser Scanning And Digitizing Systems
Specializes in the design and implementation of intelligent computeraided visual metrology and quality control systems for high-precision metal and plastic industries.
http://www.nextec-wiz.com/
At Nextec our core expertise is in intelligent, software driven, laser metrology. We provide non-contact, 3D scanning and digitizing solutions as well as automated quality control and process control systems.
The company has developed the WIZprobe, a unique scanning probe, based on proprietary laser technology.
The WIZprobe combines vision and laser sensors together with patented optics and image processing, to provide fast and accurate scanning solutions Nextec invites you to Turbo Expo 2004 in Vienna, Austria. (June 14-17, 2004)

86. Mikes
Centre for metrology and Accreditation Mittatekniikan keskus Mätteknikcentralen, MIKES, FINAS, metrology, Shopping cart, Search, Feedback. suomeksi, på svenska.
http://www.mikes.fi/Default.aspx?langID=uk

87. Consolidated Metrology Services Inc.
Provides scientific evidence of improving machine tool parts quality, supporting the benefits of metrology and calibration.
http://machtoolcal.com
C onsolidated M etrology S ervices, I nc. Machine Tool Calibration and Repair Home Our Services The Need for Calibration Benefits of Machine Assessment ... Contact Information
About US
Corporate Structure CMSI is a locally owned business operated by Cecil W. Dickson who has over fourteen years of experience in the machine tool measurement and repair field. Cecil’s expertise in the field of machine tool metrology is known worldwide. Having worked for Caterpillar in their Technical Services Division, he provided several business units and suppliers with machine metrology services. Cecil has traveled across the globe giving seminars, and presentations on the benefits of machine tool calibration. The focus of this effort has been and continues to be utilizing the ANSI/ASME B5.54 and B5.57 standard. Experience Cecil has the ability to provide superior measurement services, and due to his mechanical background he is able to provide solutions to your problem as well. This can range from suggestions that your maintenance department can perform to having CMSI do the repairs for you. There are companies that provide measurement services and some that provide repair services.

88. Steamboat Semiconductor Has Used, Surplus, Rebuilt, 6" & 8" Semiconductor Equipm
Buyers and sellers of preowned, 6 8 surplus semiconductor equipment for manufacturing, metrology, assembly, and packaging processes. Our inventory includes equipment for metrology, CVD, PVD, diffusion, resist coat, resist develop, photolithography, plasma etch and other processes.
http://www.steamboatsemi.com/
Home Page Company Info Equipment Contact Us We are an equipment trading company. We specialize in the acquisition and sale of high quality, used, surplus and rebuilt, 6" and 8" semiconductor equipment /* You may give each page an identifying name, server, and channel on the next lines. */ var pageName = "Home Page"; /**** DO NOT ALTER ANYTHING BELOW THIS LINE! ****/ var code = ' '; document.write(' '); document.write('>');

89. Measurement - Wikipedia, The Free Encyclopedia
Measurement. (Redirected from metrology). metrology. metrology is the study of measurement. A metric is a standard for measurement.
http://en.wikipedia.org/wiki/Metrology
Measurement
From Wikipedia, the free encyclopedia.
(Redirected from Metrology
Measurement is the determination of the size or magnitude of something. Measurement is not limited to physical quantities, but can extend to quantifying almost any imaginable thing such as degree of uncertainty consumer confidence , or the rate of increase in the fall in the price of beanie babies In physics and engineering , measurement is the process of comparing physical quantities of real-world objects and events . Established standard objects and events are used as units , and the measurement results in at least two numbers for the relationship between the item under study and the referenced unit of measurement, where at least one number estimates the statistical uncertainty in the measurement, also referred to as measurement error (in a philosophical distinction). Measuring instruments are the means by which this translation is made. For example, the unit for length might be a well-known person's foot, and the length of a boat can be given as the number of times that person's foot would fit the length of the boat.
A measurement is a comparison to a standard.

90. Vantek & NEM Home Page
Provides calibration services and is a distributer of Vantek software. Information also includes descriptions of services, trial and full version downloads.
http://www.vantek-nem.com/
This page uses frames, but your browser doesn't support them.

91. Why Study Metrology?
Contents Previous Why Study metrology? La metrologia non é scienza, é un incubo. (metrology is not a science; it’sa nightmare). G. De Sanctis.
http://www.metrum.org/measures/whystud.htm
Why Study Metrology?
La metrologia non é scienza, é un incubo. -G. De Sanctis
In 1923, Wilhelm Kubitschek, archaeologist and numismatist, author of the most comprehensive study on ancient measures of time, wrote: There are scholars such as Theodor Mommsen and Hultsch, as Dörpfeld and Nissen, who have presented the problems of metrology in a comprehensive, clarifying and self-contained form. But, because of the way it has been handled in the last decades and particularly in the last few years, metrology is today probably the most unappealing field of ancient scholarship. pheidolos from the verb pheidomai, metra kai stathma kai nomisma (or nomos ). This phrase, which is the key one in ancient metrological texts, corresponds to the phrase numero pondere mensura of Roman law and is found in important passages of the Bible and of the Talmud. It is a phrase constructed according to the principles of Semitic syntax and consists of three synonymous terms linked by an explanative vau (literally translated into Greek by kai I had pursued the study of metrology because I knew it was a promising field, providing a solid method of investigating several topics of ancient history, but I did not suspect that I had involved myself in a controversy touching upon basic issues of intellectual life. At moments, I felt that I should abandon my research, since my task was overwhelming, but what I found was so outrageous in terms of my values of justice and truth that I concluded I should continue it.

92. Florida Metrology
Dimensional and visual inspection products incl. gages, microscopes, CMMs, optical and precision measuring tools.
http://www.floridametrology.com
MicroVu Vertex
The next generation of vision systems available in 8"x6"x6" and 12"x12"x6" capacity. Advanced mechanical design for high speed and accuracy with powerful InSpec software. Lighting options enhance edge defination. Optional touch probe and rotary stage increase system capabilities. The
Dimensional and visual inspection products - Florida Metrology
We are distributors for leading manufacturers of dimensional and visual inspection products. We have over 12 years of experience, and offer our customers an uncompromised standard of excellence in the service we provide. Florida Metrology will fulfill your every need in visual and dimensional products, from vision measuring systems , calipers and other hand tools, to fully automated vision and touch probe measuring systems. Please feel free to browse our website to see the full range of products we are able to offer.

93. Metrology: The Forgotten Science
.., The Key to Ancient Architecture. The Mapping of the Earth. A History of Measures. The Deluge as Metaphor. Gyges and Homer. The Persian Wars.
http://www.metrum.org/
The Key to Ancient Architecture The Mapping
of the Earth
A History of Measures ... The Gospel According to Seneca A site devoted to the memory of Livio Catullo Stecchini

94. Salzenstein, Patrice
PhD research engineer in time and frequency metrology, featuring phase noise measurements, and the spectral domain for microwave, based in Besan§on, France.
http://www.lpmo.edu/~salzenst/english.html
Phase noise measurements: Dr Patrice Salzenstein (Research engineer CNRS)
english version

russian version / version russe

spanish version / version espagnole

CURRICULUM VITAE Personal informations Diplomas and Degrees Job experience Publications ... Languages NEW: LPMO becomes the first laboratory of the CNRS to be ISO17025 accredited for its calibration activities in french
(e-mail: Click here RESEARCH ACTIVITIES METROLOGY ACTIVITIES Last update : 28 th august 2003

95. DuganTech.com - Sensors, Process Controls, Metrology, Instrumentation
Manufacturers Representative and distributors of high performace instruments, sensors, industrial calibration equipment and metrology instrumentation.
http://www.dugantech.com/
HOME LINECARD CATALOG REQUEST CONTACT US ...
June 15, 16 ,17

Manufactures Representatives and Distributors
Pressure Measurement

Temperature

Flow PRODUCTS
Gas Detection

Emission Analyzers,

Level Sensors Liquid Analytical Automation and Control

Questions about this web site? Contact Us!

96. Reynolds Machine & Tool - Distributor, Machine Tools, Workholding, Indexing, Too
Distributes machine tools, workholding, indexing, toolholding, cutting tools, carbide tools, diamond abrasives, coolant system, metrology, CNC machine, air tools. Melrose Park, IL.
http://www.rmtcorp.com/

L
atest News About Us
Contact Us

Visit Us Product Support MACHINE TOOLS
Machine Components

Workholding
... Site Map Links: RMT Technology
BILZ

Morris Tooling

  • Machine Tools Workholding, Toolholders
    and Accessories Cutting Tools, Carbide,
    Abrasives and Coolants Metrology
832 pages Line card MONSTER - HOT DEALS !! Visit Us at Our Permanent Showroom GRAND OPENING of MAKINO Certified ... NUT TAPPERS Visit our manufacturing division Last updated: Nov-2002 3131 Randolph Street E-mail: info@rmtcorp.com Web Pages Designed by Webmaster

97. Czech Metrological Institute
National metrological body active in fundamental metrology, calibration of measuring instruments,
http://www.cmi.cz/
- OUTSOURCING CHEMIE
RegMet

EVITHERM
INCOLAB - implementace smìrnice LVD
webmaster@cmi.cz
ZDE SEZNAM , xls 45 kB.
datum poslední aktualizace: 05. 06. 2004
autor: Franti¹ek Jelínek
zdrojový soubor: 001-IS-C006-04.doc
verze pro tisk: zobrazit
Perfect System

98. Welcome To ETS
Specialists in preowned metrology and optical inspection equipment for the semiconductor, flat panel and memory disk industries as well as equipment for general research and development.
http://www.ets-us.com/

99. Welcome To Northwest Metrology
Offers IFR, Ametek, US Gauge, Versagauge, and Anderson gauges, calibrators, testers, avionics test equipment, and deadweight testers.
http://www.nwmetrology.net/
var test=0; document.write("<");document.write("! "); document.write(" ");document.write(">"); Northwest Metrology is a premier distributor of specialty instrumentation and equipment, as well as premium quality gauges from manufacturers like AMETEK Winters , and Versa Gauge . The following are some of the top manufacturers that we distribute for and what they offer: AMETEK is a leading global manufacturer of electronic instruments and electric motors. They are a leading manufacturer of advanced monitoring, testing, calibrating, and display instruments sold to the aerospace, heavy-vehicle, and process industries worldwide. They are also the world's largest manufacturer of air-moving electric motors for the floor care industry and a leading producer of brushless air-moving motors for aerospace, business machine, mass transit, medical, and computer markets. WINTERS Versa Gauge , servicing all industries that require pressure and temperature measurement. These industries include: Petro-Chemical, Pulp and Paper, Plumbing, HVAC, Food Processing, Refrigeration, Hydraulics and many others. Winters can produce a wide range of custom products (e.g. Special ranges, dials, connections , etc.) usually in record time IMR Environmental Equipment, Inc.

100. Calibration And Metrology Services
Calibration and metrology Services.
http://www.mts.com/services/cali_metr.htm
Services
Calibration and Metrology Services
Field Calibration Services
Metrology Laboratory Services
MTS provides a full range of accredited calibration services for force, pressure, vibration, mass, temperature, torque, electrical, and dimensional test equipment. For on-site transducer and system calibrations with minimal downtime, contact our A2LA-accredited field service calibration staff. For calibrations of other test and measuring devices, send your equipment and transducers to our A2LA-accredited metrology laboratory. Back to MTS Home info@mts.com ...
Privacy Statement

Page 5     81-100 of 173    Back | 1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | Next 20

free hit counter